Glenn Posted November 25, 2004 Report Posted November 25, 2004 Anyone make their own jibs? If so any advice? Right now I'm expecting to spend some time making a drop in, and looking for some metal rails. I have a few pvc pipes, but I'm not sure how well they will work. Quote
pyro_boarder Posted November 25, 2004 Report Posted November 25, 2004 I'm planing on making a rail or two out of 3" pvc drain pipe, i've used it to slide on before but It was on a toy snow board. It worked god with that(a little slick though) I havent tried it on a real snowboard yet. Quote
The_Public_Enemy Posted November 25, 2004 Report Posted November 25, 2004 Anyone make their own jibs? If so any advice? Right now I'm expecting to spend some time making a drop in, and looking for some metal rails. I have a few pvc pipes, but I'm not sure how well they will work. <{POST_SNAPBACK}> I wouldn't even bother with PVC or even soft metal like aluminum if you don't have a street dweller (no edges). Freeze magazine's #1 rule in specing urban rails is that the rail is a hard metal like steel or iron. You're edges are steel and they cut into softer metals. So if you go to slide a soft metal rail, you're edges will dig in and send you into a face plant . The only way you could slide a soft metal or PVC with a real board is if you have a street dweller, or if you only 50-50 it (We skiers don't have that option ) Quote
Glenn Posted November 25, 2004 Author Report Posted November 25, 2004 Hmm, well in that case I'll have to visit some friends with farms, they always have pipes laying around. Maybe even a junkyard. Any advice on sanding/painting rails so they dont rust? Quote
Gurp Posted November 25, 2004 Report Posted November 25, 2004 Well technically skiers so have the option of doing 50-50s, but its hard and could end up being really painful. beleive me ive tryed 50-50s a rail at jack frost. It hurts Quote
The_Public_Enemy Posted November 26, 2004 Report Posted November 26, 2004 Hmm, well in that case I'll have to visit some friends with farms, they always have pipes laying around. Maybe even a junkyard. Any advice on sanding/painting rails so they dont rust? <{POST_SNAPBACK}> Do NOT paint the rail! That would be asking for another faceplant Again, your edges would slice into the paint and stay there while your body keeps going. Notice only the sides of rails are painted at real mountains. If you sand the rail down to shiny metal (I recommend a sandblaster) and it's kept off the ground, it shouldn't rust if you use it enough. Quote
Justin Posted November 26, 2004 Report Posted November 26, 2004 Homemade jibs are my specialty, my backyard has like 3 rails and a box. The best rails, in my opinion are actually those toy store rails. Factor X recently went out of business, so i went down to kb toys and bought 5 6ft rails for 10 bucks each on clearence. they are cool for small places, you can put them just about anywhere, and for 50 bucks i got 30 feet of rail. But, i also like to build my own stuff. metal pipe with fittings are your best option, besides welding your own, that is. just get an 10ft pipe, some elbows and a couple of t's and little pipes and put one together. you can make all kinds of stuff with the fittings. kinks, flat rails, the sky is the limit with just a little imagination, and they are quite easy and can be taken apart for storage very quickly. Heres a rough drawing i made in photoshop, just do the same on the other end. PVC is your enemy. They chip, slide like crap, and yes, catch your edge. Painting will do no harm what so ever. Terrain parks paint their rails every year. The top layer is usually gone the first day. Your edges will not dig into the paint. As for the drop in, build something and make the top layer with some treated ply, paint it, and then seal it with a wood sealent. it will last for quite a while. Quote
insomniac Posted November 26, 2004 Report Posted November 26, 2004 Pvc slides fine, but if you land on it hard, you'll dig in. And also, How does using fittings work? Whenever Ive seen elbows and stuff they always stick out and that would be horrible. And yeah, the paint will just chip off. Quote
Glenn Posted November 26, 2004 Author Report Posted November 26, 2004 Homemade jibs are my specialty, my backyard has like 3 rails and a box. The best rails, in my opinion are actually those toy store rails. Factor X recently went out of business, so i went down to kb toys and bought 5 6ft rails for 10 bucks each on clearence. they are cool for small places, you can put them just about anywhere, and for 50 bucks i got 30 feet of rail. But, i also like to build my own stuff. metal pipe with fittings are your best option, besides welding your own, that is. just get an 10ft pipe, some elbows and a couple of t's and little pipes and put one together. you can make all kinds of stuff with the fittings. kinks, flat rails, the sky is the limit with just a little imagination, and they are quite easy and can be taken apart for storage very quickly. Heres a rough drawing i made in photoshop, just do the same on the other end. PVC is your enemy. They chip, slide like crap, and yes, catch your edge. Painting will do no harm what so ever. Terrain parks paint their rails every year. The top layer is usually gone the first day. Your edges will not dig into the paint. As for the drop in, build something and make the top layer with some treated ply, paint it, and then seal it with a wood sealent. it will last for quite a while. <{POST_SNAPBACK}> Hmm, don the joints create a problem riding over, or am in not understanding what they are. When i htink joints/fitting i think of a piece that comes aroound the pipe, mabe a half inch, that would most definately cause problems riding over. Do you have any actual pictures i could see? As far a as that factor x, are they still available, or are they pretty much gone now? Quote
Justin Posted November 26, 2004 Report Posted November 26, 2004 the joints shouldn't make a problem, i mean if you jump on your fine. i usually line it up with a ramp and just pack the end of the rail into the snow. as for the factor x stuff, i think they are all gone. but the sports authority has a couple of rails for 20 bucks. these are a bit different, but they are square, and im sure you would want a square rail over a round one. they are well worth the price, and like i said, you can put them ANYWHERE. http://www.thesportsauthority.com/family/i...estsellgcat_txt Quote
The_Public_Enemy Posted November 26, 2004 Report Posted November 26, 2004 Mabye if you spraypaint the rails it'll chip off, but thick paint you find on some hand rails will catch edges. No point painting 'em anyway except for cosmetics. Quote
soldier32 Posted November 26, 2004 Report Posted November 26, 2004 yea ive had pvc rails in my backyard and as long as ur edges are fairly dull, and not brand-new sharp, you'll be fine on a pvc rail and wont dig in. i never dug in on mine Quote
LineSki Posted November 26, 2004 Report Posted November 26, 2004 (edited) my advice for making rails is all about the scrap metal. go to the junk yard get some 3 inch square tubing and some 2 in for legs i then heat up the parts i want bent for kinks and what not. also i weld mine together and when you go to the scrap yard you can get 30 feet of metal for 10 or 15 bucks. then just go home and wirebrush it all. as for painting it goes i just put down two coats of the clear coat spray paint. this keeps it from oxidizing. Edited November 26, 2004 by lineski2007 Quote
Glenn Posted November 26, 2004 Author Report Posted November 26, 2004 Well, as it looks right now, I'm not getting anything. My parents won't let me keep the rails in the yard or the shed. "We bought you the camelback pass so you could have everything you needed there, the mountain the rails, the lifts" So anyways, I cant justify a purchase, and or spending time on something, that I have to ditch as soon as I leave school. So until I can convince my parents, no homemade jibs for me Quote
insomniac Posted November 26, 2004 Report Posted November 26, 2004 Say they're for the days that you cant get up to the hills. or for with your friends after the mountains close. Something like that. Quote
tretiak Posted November 26, 2004 Report Posted November 26, 2004 went to sport authority today and the have a 6.5 ft kinked rail for 50 bucks im thinking of gettng it and u and take it apart and store it in a small area Quote
Glenn Posted November 26, 2004 Author Report Posted November 26, 2004 Well, I went to home depot today, I was checking stuff out, and if I can convince my parents, I could put together a 10 triple barrel for 25 bucks or so. I just finished talking to them again, and they said there is nowhere to store 10 foot pole, which isnt exactly true, but its there house Quote
romemadman Posted November 28, 2004 Report Posted November 28, 2004 sports athurity has some plastic quarter pipes but they ae pieces of shit i jumped on 1 and i almost broke it Quote
Glenn Posted November 28, 2004 Author Report Posted November 28, 2004 Yeah, so I convinced the rents to let me build one. The only problem now is the drop in. I'm hoping the sandmound has enough of a hill to pick up speed. If not, maybe I'll use the tractor and the plow to build a big pile of snow. Quote
LineSki Posted November 28, 2004 Report Posted November 28, 2004 get a bunch of random shit and stack it on top of each other then push all the snow together and shape it, you dont need much of a drop in for a rail. Quote
Glenn Posted November 28, 2004 Author Report Posted November 28, 2004 get a bunch of random shit and stack it on top of each other then push all the snow together and shape it, you dont need much of a drop in for a rail. <{POST_SNAPBACK}> Good idea on the random stuff. I was thinking about builiding a couple massive snowballs, like the ones you make for snowmen, and then shaping them, but random stuff would def work better. Quote
pyro_boarder Posted November 28, 2004 Report Posted November 28, 2004 I think making a giant snow ball for the base then putting more snow on it to shape it would work good. that would give you a nice solid base Quote
The_Public_Enemy Posted November 28, 2004 Report Posted November 28, 2004 Yeah, unless you're planning to do some big gaps on something like a kink rail, you won't need much of a drop in. Quote
Justo8484 Posted December 2, 2004 Report Posted December 2, 2004 i'm not gonna rip on anyone in particular, but pvc definately works well. its generally slicker than a metal rail, and you can catch an edge easier, but its in your yard, not at a mtn. it forces you to be balanced correctly, which last time i checked isnt a bad thing. and painting the rail will not make you catch, rails are painted for cosmetics and to keep them from rusting as quickly, and it doesnt affect how the rail slides much if at all. last year we got about 2 inches of snow, i screwed a scrap peice of wood into the bottom of a 3" pvc pipe to stabilize it, and it worked fine, i learned all sorts of stuff onto that thing with more or less no lip at all, just ollying onto the rail. and the pipe fittings are a bad idea, you will definately catch on those unless you can hop off the rail in time, i've tried. Quote
Sno Mountain Skier Posted December 2, 2004 Report Posted December 2, 2004 the snow ball idea works, last year i used it to build jumps. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.