Timeless Posted December 15, 2004 Report Share Posted December 15, 2004 At Killington, I noticed a large proportion of the boarders running very "forward" stances, just wondered what the "norm" was amongst PASR members and what works best on our east coast "hardpack" (aka ice ) I spent last year (my first) at +18 / -9 and about 21 inches, with my new Technines on this year I may experiment a bit more. Sorry to all the skiers, I guess a standard 0,0 or 90,90 for you guys, depending on which way you look at it. Quote Link to comment Share on other sites More sharing options...
Glenn Posted December 15, 2004 Report Share Posted December 15, 2004 (edited) I ride 15, -6 don't know the distance off hand. I think I may ride with a little more on the front binding. It's basically whatever you feel comfortable with and what type of riding. If you plan on doing switch riding you need a little more angle on your rear foot. Front is whatever you are comforatble with. The distance between is generally larger for park riding. Just play around a bunch and see what you like. Edited December 15, 2004 by dthmtluncrn Quote Link to comment Share on other sites More sharing options...
flick Posted December 15, 2004 Report Share Posted December 15, 2004 I recently set up my new board (k2/www/152) as 15, and - 15. I have my feet equally set so riding switch feels the same as riding regular. This works out nicely for this board cuz its twin tipped (no distinctive nose/tail). I don't know the distance between my bindings and I really should figure it out because its much farther apart than my stance last year. Quote Link to comment Share on other sites More sharing options...
train36 Posted December 15, 2004 Report Share Posted December 15, 2004 Depends on what I am riding, on my freestyle setup I ride -9/+17. On my freeride setup I ride 0/+17. I go a little wider on my freestyle setup around 22 inches and about 21.5 on the freeride setup ( I am 5'9). I was told to have both angles positive for freeridng but it does not feel right to me. I think its all about what you feel is comfortable. You will see a lot more forward stances up there than here because there is a lot more freeriding and these people are most likely are not hitting the park. But if you went over to the park almost everyone would be rockin a duck stance. If you are riding park or a lot of switch than I would stay with a duck stance -/+, for cruising around its up to you. Quote Link to comment Share on other sites More sharing options...
JBS Posted December 15, 2004 Report Share Posted December 15, 2004 +30/+20 21" 165 freeride soft setup, +60/+60 19.5" 169 carving board (plates & hard boots) For me its all about making sweet carves. Are there any other plate riders out there? This is a great site. Nice to know there are so many people into PA mountains. Quote Link to comment Share on other sites More sharing options...
Glenn Posted December 15, 2004 Report Share Posted December 15, 2004 I'd really love to get a plate and hard boot board, but I can't justify it with such lowsy trails around here. I need something I can take into the park so I'm not bored out of mind. Quote Link to comment Share on other sites More sharing options...
JBS Posted December 15, 2004 Report Share Posted December 15, 2004 The small mountains and no powder is the reason I ride plates. (and I like to stay on the ground) Find a groomed trail and its like a private roller coaster ride. Razor, Paradise at Blue and Nine Mile at Camelback are decent carving trails. Plus east coast hard pack (ice) is perfect for an alpine board. Quote Link to comment Share on other sites More sharing options...
Glenn Posted December 15, 2004 Report Share Posted December 15, 2004 The small mountains and no powder is the reason I ride plates. (and I like to stay on the ground) Find a groomed trail and its like a private roller coaster ride. Razor, Paradise at Blue and Nine Mile at Camelback are decent carving trails. Plus east coast hard pack (ice) is perfect for an alpine board. <{POST_SNAPBACK}> Yeah I can see the whole ice thing, but there just isnt enough vert for me to be content just carving. If I rode at blue all the time, things may be different, but since CB is my primary mountain, I need to do something else. Quote Link to comment Share on other sites More sharing options...
Schif Posted December 15, 2004 Report Share Posted December 15, 2004 I generally go with a 15/-8, it is a pretty good all around stance. I can go hunting for powder or just chill in the park really easily. Carving cruisers is fun and all, but I cant justify setting myself up to only do that. Quote Link to comment Share on other sites More sharing options...
poconoceancity Posted December 15, 2004 Report Share Posted December 15, 2004 I generally go with a 15/-8, it is a pretty good all around stance. I can go hunting for powder or just chill in the park really easily. Carving cruisers is fun and all, but I cant justify setting myself up to only do that. <{POST_SNAPBACK}> I ride +21/+9 and find its good all around riding. Quote Link to comment Share on other sites More sharing options...
soldier32 Posted December 15, 2004 Report Share Posted December 15, 2004 i got mine set up as wide as my board will allow my bindings to go (which is about 20') and ive got 15 degrees in the front, and negative 12 in the back. i spend most of my time in the park, so its totally a freestyle setup Quote Link to comment Share on other sites More sharing options...
AtomicSkier Posted December 15, 2004 Report Share Posted December 15, 2004 Quote Link to comment Share on other sites More sharing options...
Glenn Posted December 15, 2004 Report Share Posted December 15, 2004 <{POST_SNAPBACK}> The numbers everyone are rattling off are the degrees off center their bindings are set at. If your feet are perfectly perpendicular to the board they are at 0 degrees. The front foot is almost always at a positive angle (I have seen a few people who ride at 0 for both). The rear foot is sometimes at a negative agle for better switch, and sometimes at a positive angles for carving. The distance is the distance between the bindings. Quote Link to comment Share on other sites More sharing options...
AtomicSkier Posted December 15, 2004 Report Share Posted December 15, 2004 The numbers everyone are rattling off are the degrees off center their bindings are set at. If your feet are perfectly perpendicular to the board they are at 0 degrees. The front foot is almost always at a positive angle (I have seen a few people who ride at 0 for both). The rear foot is sometimes at a negative agle for better switch, and sometimes at a positive angles for carving. The distance is the distance between the bindings. haha yea, i know, I just like that smilie. I was once a boarder myself, and I could easilly still do it. but I just like skiing alot more Quote Link to comment Share on other sites More sharing options...
soldier32 Posted December 15, 2004 Report Share Posted December 15, 2004 o yea i usually have my forward lean set like a little less than halfway, but i change it depending on the conditions of what im doing Quote Link to comment Share on other sites More sharing options...
Glenn Posted December 15, 2004 Report Share Posted December 15, 2004 (edited) o yea i usually have my forward lean set like a little less than halfway, but i change it depending on the conditions of what I'm doing <{POST_SNAPBACK}> I have my forward lean (the forced lean forward on the boot implemented via heel plate) set as far back as possible. I can get more than enough heel edge without it. Again if I ran a more alpine oriented setup I might have it set forward a little more for a forced tuck, but... I can't justify only riding trails when I have such limited vert. Edited December 15, 2004 by dthmtluncrn Quote Link to comment Share on other sites More sharing options...
pyro_boarder Posted December 15, 2004 Report Share Posted December 15, 2004 I have mine set up at 7/-7 Quote Link to comment Share on other sites More sharing options...
soldier32 Posted December 15, 2004 Report Share Posted December 15, 2004 I have my forward lean (the forced lean forward on the boot implemented via heel plate) set as far back as possible. I can get more than enough heel edge without it. Again if I ran a more alpine oriented setup I might have it set forward a little more for a forced tuck, but... I can't justify only riding trails when I have such limited vert. <{POST_SNAPBACK}> yea i dont really use it for the heel edge, but it helps me to get a lot more pop with my ollies if i have it more forward though Quote Link to comment Share on other sites More sharing options...
tretiak Posted December 16, 2004 Report Share Posted December 16, 2004 (edited) +17/-17 for teh same reason easier to ride switch for freestyle 17/0 for freeriding Edited December 16, 2004 by forumdestroyer154 Quote Link to comment Share on other sites More sharing options...
Justin Posted December 16, 2004 Report Share Posted December 16, 2004 +19/-4, probably around 18 or 19 inches, i like it relaxed i do mostly park, but ive been known to carve around the mountain, like inbetween trails where the lifts are on powder days (its untouched powder, just cant be scared of the ski patrol) Quote Link to comment Share on other sites More sharing options...
Glenn Posted December 16, 2004 Report Share Posted December 16, 2004 yea i don't really use it for the heel edge, but it helps me to get a lot more pop with my ollies if i have it more forward though <{POST_SNAPBACK}> I've never heard that, but I will have to give it a try. The preseason is great for testing stuff out because the riding is only mediocre anyways. Quote Link to comment Share on other sites More sharing options...
nick malozzi Posted December 16, 2004 Report Share Posted December 16, 2004 the distance between my bindings is beyond me. i just played with it til it felt right. my m3 jib setup is at -15/15. and when my burton custom comes in it will be set at -12/15. i prefer the duck stnace for everything because i have played ice hockey all my life and it has forced my leg and muscle growth to make me a bit duck footed naturally. so the duck stance just feels more comfortable overall. plus when im carving i love to be able to just ollie to switch and keep on going. as for binding lean i dial that in with the back plate. a lil more for carving, but overall i dont go too crazy with it. Quote Link to comment Share on other sites More sharing options...
VTmark Posted March 2, 2005 Report Share Posted March 2, 2005 i ride a +3/0 i need to try to duct it but i never get around to trying it out. it takes to long to readujust my bindings. Quote Link to comment Share on other sites More sharing options...
zaldon Posted March 3, 2005 Report Share Posted March 3, 2005 i chang my stance alote +20/-10 or + 45/+15 some were around their i think Quote Link to comment Share on other sites More sharing options...
DHarrisburg Posted April 6, 2005 Report Share Posted April 6, 2005 (edited) -15/+12, zero forward lean, 23 inch stance on a 156 jeenyus rental in all conditions, including 4 feet of fresh forward lean is for pipe jocks and people who never skated also, alpine boards are a waste of materials and should be burned Edited April 6, 2005 by DHarrisburg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.